JLM Diesel & Petrol Performance DPF/GPF Spray

$55.00

RRP inc GST (AUD)

CODE: J02224

<h4>Highlights</h4> <h4>Highlights</h4>

Highlights

  • Fast and effective cleaning of DPF/GPF
  • No need to remove or dismantle the filter
  • Extends filter service life
  • Cleans soot, carbon, deposits
  • Free of metal
  • Advanced foaming formula
<h4><strong>Warning:</strong></h4> <h4><strong>Warning:</strong></h4>

Warning:

  1. May be fatal if swallowed and enters airways.
  2. Follow the MSDS sheet if medical attention is required.
  3. Dispose of contents and containers in accordance with local regulations.
  4. Store according to local regulations.

JLM Performance DPF/GPF Cleaning Spray quickly and effectively removes soot, particulate matter, carbon and other deposits from contaminated diesel particulate filters (DPF) and gasoline particulate filters (GPF) without the need to dismantle the filter.

The advanced foam formulation of the JLM Performance DPF/GPF Cleaning Spray ensures extended contact time and optimal adhesion to the internal filter structure, allowing deposits to be loosened and dissolved more thoroughly. The product restores the full flow capacity of the particulate filter, enabling exhaust gases to pass freely again without back pressure.

Vehicles that are mainly used for short journeys or are rarely driven on motorways often fail to reach sufficient exhaust temperatures for proper particulate filter regeneration. This results in poor regeneration, reduced engine performance and increased fuel consumption. JLM Performance DPF/GPF Cleaning Spray offers an effective solution to these problems.

1. Shake well before use and keep the aerosol can upright during the procedure.

2. Bring the engine up to operating temperature, then switch it off.

3. Remove the temperature sensor and/or pressure sensor.

4. Insert the spray tube with special nozzle into the opening facing the particulate filter.

5. Spray the entire contents of the can as foam into the DPF or GPF.

6. Refit the temperature sensor and/or pressure sensor.

7. Regenerate the particulate filter using diagnostic equipment or by taking the vehicle for a test drive.

8.Check the engine management system for fault codes and clear them if present.

Application: Technical Spray

Purpose: DPF/GPF Cleaner

Recommended Usage (km): When GPF or DPF warning light comes on

Volume (ml): 500

Blend Ratio: 1 can per DPF/GPF service

Units per case: 12

Product Info DOWNLOAD
Product Safety Info DOWNLOAD