JLM Diesel DPF Spray

$52.50

RRP inc GST (AUD)

CODE: J02220

<h4>Highlights</h4> <h4>Highlights</h4>

Highlights

  • Fast and effective cleaning of DPF
  • No dismantling of DPF
  • Extend service life
  • Cleans soot, carbon, deposits
  • Free of metal
<h4><strong>Warning:</strong></h4> <h4><strong>Warning:</strong></h4>

Warning:

  1. May be fatal if swallowed and enters airways.
  2. Follow the MSDS sheet if medical attention is required.
  3. Dispose of contents and containers in accordance with local regulations.
  4. Store according to local regulations.

JLM Diesel DPF Spray removes particulate, carbon and other deposits in dirty diesel particulate filters (DPF) quickly and effectively, without the need to dismantle the filter.

JLM Diesel DPF Spray is the fastest and cheapest way to help your client to get back on the road as soon as possible, whilst at the same time providing a sufficient profit margin in the workshop. It is ideal for garages when they are presented with vehicles with an illuminated particulate filter warning light, or for vehicles that do not pass the particulate measurement test during emissions testing.

Vehicles that are used to make short journeys or are never or hardly ever driven on motorways do not become warm enough, which means that they regenerate (clean) the particulate filter poorly, or not at all in many cases. Diesel DPF Spray offers a solution for the engine symptoms of loss of power or increasing fuel consumption that is caused primarily by driving short distances.

JLM Diesel DPF Spray restores the particulate filter’s full capacity and ensures that exhaust gases can once again be expelled by the exhaust without any resistance. Spray JLM Diesel DPF Spray into the particulate filter prior to forced regeneration (by means of a test drive or OBD) to clean the filter and help the vehicle pass its tests.

JLM Diesel DPF Spray is a spray that comes in a handy aerosol can and contains a high concentration of active ingredients to clean and dissolve dirt.

JLM Diesel DPF Spray cleans and regenerates dirty and blocked diesel particulate filters by reducing the combustion temperature of particulate, which means that it combusts earlier and faster at a lower engine temperature. It is compatible with all old and new diesel engines in all vehicles with a particulate filter.

The contents of one can of JLM Diesel DPF Spray are sufficient to treat one particulate filter. JLM Diesel DPF Spray is non-flammable, contains no ash or metal and evaporates without leaving any residue.

In the case of stubborn dirt, we recommend that the engine and the particulate filter are cleaned using the JLM DPF Cleaning Kit.

1. Bring the engine to its operating temperature and then switch it off.

2. Remove the temperature sensor and/or pressure sensor.

3. Insert the spray pipe with special nozzle into the opening facing the particulate filter and spray the entire contents of the can into the diesel particulate filter (DPF).

4. Refit the temperature sensor and/or pressure sensor once the spraying is complete.

5. For optimal results, add JLM DPF Cleaner to the fuel tank after spraying the DPF Spray and before initiating regeneration.

6. Use a diagnostics tool or take the vehicle on a test drive to regenerate the DPF.

7. After regeneration, check the engine management system for any error codes and clear them if present.

NOTE: Always wear gloves and safety goggles during the entire cleaning process to protect yourself.

Application: Technical Spray

Purpose: DPF Cleaner

Recommended Usage (km): After service

Volume (ml): 400

Blend Ratio: 1 use

Units per case: 12

Product Info DOWNLOAD
Product Safety Info DOWNLOAD